Products
Alfagomma
T343AH Series
270 PSI Braided Refinery Steam Hose
GENERAL APPLICATIONS
- Saturated steam in applications where an oil resistant cover is needed
- Use with superheated steam will shorten hose life. Proper draining of steam hose after each use will increase service life.
- Not recommended for washdown applications where detergent or oils are present.
CONSTRUCTION
- Tube – Black extruded EPDM – heat-resistant. Not for steam cleaner use.
- Reinforcement – High tensile steel wire braids
- Cover – Red special compound - heat, oil-resistant, ozone and hydrocarbon resistant. Pin-pricked cover to allow venting. (Black version available upon request with minimum order quantities.)
SERVICE TEMPERATURE RANGE
Saturated steam where an oil resistant cover is required. Constant Operation: -40°F (-40 °C) to +410°F (+210°C) Intermittent to +450°F (+232°C)
BRANDING
Embossed brand ALFAGOMMA – ITALY 343 18 BAR (270 PSI) STEAM – DRAIN AFTER USE – QTR/YEAR (embossed)
| Series Number | ID | OD | Max. Working Pressure (psi) | Min. Bending Radius (in) at 68°F |
Standard Length (ft) | Weight (lbs/ft) |
||
|---|---|---|---|---|---|---|---|---|
| (in) | (mm) | (in) | (mm) | |||||
| T343AH075 | 3/4 | 19 | 1.22 | 31 | 270 | 7 1/2 | 50/100 | 0.54 |
| T343AH100 | 1 | 25 | 1.50 | 38 | 270 | 10 | 50/100 | 0.66 |
*T341AA/AH 1 1/4", 1 1/2" & 2" not suitable for “Ship to Shore” service.
Refer to Steam Hose Testing & Inspection
PLEASE NOTE: Drain hose after each use to avoid tube damage before hose is put back in operation, to avoid "popcorning" of tube.
COUPLING SUGGESTIONS: Steel or malleable iron male insert NPT or female ground joint or washer type with spuds attached with 2 or 4 bolt interlocking clamps.




