Kuriyama of America, Inc.

Kuriyama of America, Inc Kuriyama of America, Inc Kuriyama of America, Inc.

Conqueror Concrete Hose

Products

NEOPRENE SHEET RUBBER

Black sheet rubber available in five hardnesses

N40, N50, N60, N70 and N80 Series

  • Base Polymer: Chloroprene (CR)
  • Durometer (Shore A ± 5): 40, 50, 60, 70 or 80
  • Tensile Strength (PSI): 1,105
  • Service Temp. Range: -20°F to +180°F

NEOPRENE SHEET RUBBER

Black sheet rubber available in five hardnesses

Neoprene Sheet Rubber

General Applications

  • Broad range of applications due to versatility
  • Automotive and water pump seals

General Properties:*

  • Best general purpose elastomer
  • Good chemical and oil resistance
  • Weather resistant

    *Properties shown based on Rubber Manufacturers Association Sheet Rubber Handbook, second edition.

Style NCI: 60 Duro hardness (Shore Durometer A)
Style N40: 40 Duro hardness (Shore Durometer A)
Style N50: 50 Duro hardness (Shore Durometer A)
Style N60: 60 Duro hardness (Shore Durometer A)
Style N70: 70 Duro hardness (Shore Durometer A)
Style N80: 80 Duro hardness (Shore Durometer A)
Polymer: Chloroprene reinforced with 3.4 oz./sq. yd. nylon fabric

Common Name: Neoprene
ISO/ASTM Designation: CR
Talc Free

Style ASTM Specification
(SI units)
Temp. Range Durometer Tensile Strength (psi) Elongation (%) Finish
N40 D 2000 M2BC 407 A14 B14 F17 -20°F to +180°F 35 - 45 1015 400% Plate
N50 D 2000 M2BC 507 A14 B14 F17 -20°F to +180°F 45 - 55 1015 300% Plate
N60 D 2000 M2BC 607 A14 B14 F17 -20°F to +180°F 55 - 65 1015 300% Plate
N70 D 2000 M2BC 707 A14 B14 F17 -20°F to +180°F 65 - 75 1015 200% Plate
N80 D 2000 M2BC 807 A14 B14 F17 -20°F to +180°F 75 - 85 1015 100% Plate

ASTM D2000 Specification and Tests:

M2 BC ___ A14 B14 F17

  • A14: Heat Resistance (ASTM D573): 70hr @ 100°C (max -15% tensile)
  • B14: Compression Set (ASTM D395): 22hr @ 100°C (max 35%)
  • F17: Low Temp. Resistance (ASTM D2137): 3m @ -40°C (nonbrittle)

Ordering Information

Part Number Gauge x Width
(in)
Avg. Length
(Linear ft/Roll)
Approx.
lbs/Roll
N40-02x36x67 1/16 x 36 67 96
N40-04x36x67 1/8 x 36 67 195
N40-06x36x36 3/16 x 36 36 158
N40-08x36x36 1/4 x 36 36 210
N40-02x48x67 1/16 x 48 67 128
N40-03x48x67 3/32 x 48 67 200
N40-04x48x67 1/8 x 48 67 256
N40-06x48x36 3/16 x 48 36 215
N40-08x48x36 1/4 x 48 36 280
N50-02x48x67 1/16 x 48 67 132
N50-04x48x36 1/8 x 48 36 142
N50-06x48x36 3/16 x 48 36 213
N50-08x48x18 1/4 x 48 18 142
N60-01x36x67 1/32 x 36 67 52
N60-02x36x50 1/16 x36 50 74
N60-02x36x67 1/16 x 36 67 99
N60-02x36x100 1/16 x 36 100 147
N60-02x72x67 1/16 x 72 67 197
N60-03x36x67 3/32 x 36 67 149
N60-04x36x50 1/8 x 36 50 148
N60-04x36x67 1/8 x 36 67 198
N60-04x36x100 1/8 x 36 100 295
N60-04x72x36 1/8 x 72 36 216
N60-06x36x40 3/16 x 36 40 179
N60-06x36x50 3/16 x 36 50 223
N60-08x36x36 1/4 x 36 36 214
N60-08x36x40 1/4 x 36 40 238
N60-08x36x50 1/4 x 36 50 266
N60-12x36x25 3/8 x 36 25 222
N60-16x36x18 1/2 x 36 18 214
N60-16x36x25 1/2 x 36 25 297
N60-24x36x25 3/4 x 36 25 443
N60-32x36x25 1 x 36 25 592
N60-02x48x50 1/16 x 50 50 99
N60-02x48x67 1/16 x 48 67 132
N60-02x48x100 1/16 x 48 100 197
N60-03x48x67 3/32 x 48 67 200
N60-04x48x36 1/8 x 48 36 142
N60-04x48x50 1/8 x 48 50 197
N60-04x48x100 1/8 x 48 100 394
N60-06x48x36 3/16 x 48 36 213
N60-06x48x40 3/16 x 48 40 236
N60-06x48x50 3/16 x 48 50 296
N60-08x48x18 1/4 x 48 18 142
N60-08x48x25 1/4 x 48 25 198
N60-08x48x50 1/4 x 48 50 354
N60-08x72x25 1/4 x 72 25 300
N60-12x48x25 3/8 x 48 25 296
N60-12x48x30 3/8 x 48 30 355
N60-16x48x25 1/2 x 48 25 354
N60-16x48x30 1/2 x 48 30 471
N60-16x48x40 1/2 x 48 40 628
N60-24x48x25 3/4 x 48 25 590 
N60-32x48x25 1 x 48 25 788
N70-02x48x67 1/16 x 48 67 132
N70-04x48x36 1/8 x 48 36 142
N70-06x48x36 3/16 x 48 36 213
N70-08x48x18 1/4 x 48 18 142
N80-02x36x50 1/16 x 36 50 74
N80-04x36x50 1/8 x 36 50 148
N80-06x36x50 3/16 x 36 50 223
N80-08x36x50 1/4 x 36 50 297

NOTE: N80 is also available in 48" width . . . contact Kuriyama of America.

NEOPRENE SLAB RUBBER

Style ASTM Specification
(SI units)
Temp. Range Durometer Tensile Strength (psi) Elongation (%) Finish
N60 D 2000 M2BC 603 -20°F to +180°F 55 - 65 400 150% Plate
Part Number Gauge x Width
(in)
Avg. Length
(Linear ft/Roll)
Approx.
lbs/Roll
N60-48x48x10 1 1/2 x 48 10 445
N60-64x48x10 2 x 48 10 596