Products
Tigerflex
Solarguard
AMPH-SLR™ Series
Heavy-Duty Polyurethane Lined Wet or Dry Material Handling Hose
GENERAL APPLICATIONS
- Hydro excavation
- Industrial vacuum equipment
- Material handling – heavy duty abrasive
- Slurry handling
CONSTRUCTION
PVC cover with polyurethane liner, PVC helix and grounding wire
SERVICE TEMPERATURE RANGE
-40°F (-40°C) to +150°F (+65°C)*
*Actual service temperature range is application dependent.
FEATURES AND ADVANTAGES
- Thick Amphibian™ Abrasion Resistant Polyurethane Liner – Designed for wet or dry applications where severe abrasion is a factor. Provides longer hose life and lower operating costs versus rubber or PVC hoses.
- Advanced UV Protection! – The hose material is specially formulated to resist the cracking that can result from exposure to damaging UV light. Our tests show the Solarguard material retained 97% of its original tensile strength after prolonged UV exposure, compared to only 55% tensile strength retention for similar PVC hoses.†
- Grounding Wire (6" and 8" only) – Multi-strand wire helps prevent the build-up of static electricity for added safety and to help keep material flowing smoothly.
- “Safety Yellow” Color – For high visibility on site. Reduces risk of tripping or driving over hose.
- Convoluted Cover Design – Provides increased hose flexibility.
- Oil Resistant Polyurethane Liner – Resists most animal and petroleum based oils.
| Part Number | ID | OD | Working Pressure
(psi) |
Vacuum Rating Hg (in) |
Min. Bending Radius at 68°F (in) |
Standard Length (ft) |
Weight (lbs/ft) |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| (in) | (mm) | (in) | (mm) | at 68°F | at 104°F | at 68°F | at 104°F | ||||
| AMPH-SLR300 | 3 | 76.2 | 3.65 | 92.6 | 40 | 20 | Full | 28 | 6 | 100 | 1.18 |
| AMPH-SLR600 | 6 | 153.4 | 7.00 | 177.8 | 30 | 15 | 28 | 25 | 18 | 100/20 | 4.14 |
| AMPH-SLR800 | 8 | 204.8 | 9.15 | 232.4 | 22 | 15 | 26 | 25 | 22 | 60/21 | 6.49 |
NOTES:
• Service life may vary depending on operating conditions and type of material being conveyed.
† This information is based on independent third party test reports which are, to the best of our knowledge, complete and accurate. However, no warranty is expressed or implied, as specific application parameters such as temperature, stress and strain, and chemical exposure vary widely.
CAUTION: Grounding wire is designed to help dissipate static charge when extracted and connected to ground. Hose is not to be used in combustible situations unless it has been determined by the end user the application if not sufficient to result in propagating brush discharge.
COMPLIANCES (click here for details)
Phthalate Free (10), RoHS (11)